Site surveys across Dubai & Northern Emirates
+971 50 646 3043 has@fastfixdxb.com Monday – Saturday · 8:00 AM – 6:00 PM
Dubai · Sharjah · Abu Dhabi · Northern Emirates

Sauna and steam room installation in Dubai, engineered to last

FastFix Technical Services LLC designs, supplies and installs Finnish saunas, steam rooms, hammams and cold plunge pools for villas, hotels and gyms. The joinery is the easy part — what keeps a room working in this climate is the vapour barrier, the ventilation and the electrical load. We get those right first.

✓Free site surveyMeasured, not guessed
✓Fixed written quoteNo open-ended rates
✓Warranty + AMCServiced after handover
Usually replies within the hour

Get a fixed quote

Message us with your room dimensions or a photo. We reply with a real number, not a range.

WhatsApp usSend a photo of the room — fastest route to a price +971 50 646 3043Speak to someone who has been on site has@fastfixdxb.comBest for drawings and specifications
No obligationFixed written quoteLicensed contractor
Choose by climate, not by name

Every room we build is a different point on the same scale

Temperature and humidity decide the build: what you tank, how you ventilate, and what the supply has to carry. Pick the climate you want and we will tell you what your space can take.

What we install

A sauna and steam room contractor in Dubai that handles the whole scope

Design, supply, installation, commissioning and servicing under one contract — so there is no gap between the joiner, the electrician and the tiler for a problem to fall into.

Cedar cladding being fitted over a taped foil vapour barrier during a sauna installation
12+Years in the UAE
Why FastFix

The failures we get called to fix are always the same three things

Most of our repair work is on rooms built by someone else: a vapour barrier stapled instead of sealed, a steam generator sized for a smaller volume, or a heater put on a circuit that cannot carry it. None of those show up on handover day. They show up in year two, and by then the timber is stained and the wall behind the tile is wet.

We are a licensed technical services company, not a furniture supplier with a fitter on call. The electrical, the waterproofing and the joinery are all ours, which means the responsibility is not divisible.

  • Foil vapour barrier fully lapped and taped, never stapled through
  • Generator and heater sized to measured cabin volume and DEWA load
  • Tanking flood-tested before a single tile is laid
  • Genuine Harvia, Tylö, Sawo, EOS and Helo equipment with UAE warranty
  • Handover pack: wiring diagram, commissioning sheet, care instructions

More about how we work

0+Rooms installed
0+Years in the UAE
0hSurvey response
0Emirates covered
Budget guidance

What a sauna or steam room actually costs in Dubai

Most suppliers will not publish figures. Here is the range we work in, so you can size a budget before anyone visits.

Indicative installed prices for saunas, steam rooms and wellness installations in Dubai
InstallationTypical sizeIndicative installed priceLead time
Infrared sauna cabin1–2 personAED 9,000 – 18,0001–2 weeks
Finnish sauna, prefabricated2–3 personAED 22,000 – 45,0002–3 weeks
Finnish sauna, bespoke4–6 personAED 45,000 – 90,0003–5 weeks
Steam shower conversion1–2 personAED 12,000 – 28,0001–2 weeks
Steam room, tanked & tiled2–4 personAED 25,000 – 55,0003–4 weeks
Moroccan bath / hammamTreatment roomAED 35,000 – 120,0004–8 weeks
Cold plunge with chiller1–2 personAED 18,000 – 60,0002–4 weeks
Annual maintenance contractPer roomFrom AED 2,500 / year—
What moves the number. Glass costs more than timber, so a full glass front can add 30% to a sauna. Bringing a three-phase supply to the room can add AED 4,000–12,000 depending on the distance back to the DB. And an existing wet area with drainage already in place will save more than any discount on tiles.
How it runs

From first message to commissioned room

Site survey

We measure the space, check ceiling height, find the nearest drain and open the distribution board. Thirty minutes, free, anywhere in Dubai — and it is the step that prevents every expensive surprise later.

Drawings and fixed quote

You receive a layout, an elevation, the equipment schedule with model numbers, and one price. Line by line, so you can see what the glass costs and what the generator costs.

Approvals and fabrication

We prepare developer NOCs and any municipality submissions while the joinery is in production. You get a dated programme and we hold to it.

Installation and commissioning

Waterproofing, electrical, joinery and glazing by our own team. The room is run up to temperature, tested and handed over with a commissioning sheet and care instructions.

Servicing

Dubai water is hard and generators scale fast. We come back quarterly or annually under an AMC to descale, check elements and treat the timber.

Deciding

Sauna or steam room? The differences that affect your build

The wellness arguments are a matter of preference. These are the practical differences that decide what your space can actually take.

 Finnish saunaSteam roomInfrared cabin
Climate80–100°C, 5–15% humidity43–46°C, 100% humidity45–60°C, ambient humidity
StructureInsulated timber cabin, foil vapour barrierFully tanked, tiled or acrylic, sloped ceilingFreestanding cabin, no site build
PlumbingNone requiredWater feed and floor drain requiredNone required
ElectricalSingle or three phase, 4.5–9 kWGenerator, 6–15 kW plus supplyStandard 13A socket
Heat-up time30–45 minutes10–15 minutes10–15 minutes
Best suited toVillas, gyms, hotel spasExisting wet rooms, spas, hammamsApartments, clinics, small rooms
MaintenanceLow — timber care, annual checkHigher — descaling every 3–6 monthsMinimal

Still weighing it up? Our guides go deeper on choosing between a sauna and a steam room in Dubai and on what drives sauna installation cost.

Who we build for

Different buildings, different constraints

Residential

Villas & townhouses

Basements, terraces and spare bathrooms across Palm Jumeirah, Emirates Hills, Dubai Hills, Arabian Ranches and Jumeirah Golf Estates. Developer NOC handled.

Residential

Apartments

Infrared cabins and compact steam showers where supply and drainage are fixed. Building management approval prepared for you.

Hospitality

Hotels & resorts

Multi-cabin thermal suites with drawings, MEP coordination, phased shutdowns and a documented handover for the engineering team.

Fitness

Gyms & clubs

Commercial-grade heaters built for continuous duty, benches specified for constant traffic, and a service contract that avoids closed doors.

Wellness

Spas & salons

Moroccan bath rooms, hammam slabs and treatment steam — built to survive daily commercial use, not domestic weekend use.

Clinical

Clinics & physio

Low-temperature infrared rooms for recovery and rehabilitation, on standard power, with surfaces that clean down properly.

Equipment we install

Genuine units, sized properly, with warranty that is honoured in the UAE

Harvia · Tylö · Sawo · EOS · Helo · Klafs · Steamtec · Mr.Steam · Cariitti lighting. We are equally happy to install a unit you have already bought — but we will tell you first if it is the wrong size for the room. Heater supply and replacement · steam generator service.

Client feedback

What owners say after the first winter

★★★★★

They found that our distribution board could not carry the heater we had already ordered, and said so before taking any money. Ended up with the right unit and a cabin that heats in half an hour.

AClient nameVilla, Dubai Hills
★★★★★

Our steam room had been leaking into the bedroom wall for a year. They stripped it back, tanked it properly, flood-tested it in front of us and re-tiled. No further issues.

SClient nameApartment, Business Bay
★★★★★

Four cabins across two floors, installed around our opening hours without closing the gym for a single day. The programme they gave us at the start is the one they kept to.

MClient nameFitness club, Al Quoz
Questions

Sauna and steam room installation in Dubai — FAQs

How much does a sauna cost in Dubai?

A one to two person infrared cabin typically lands between AED 9,000 and AED 18,000 supplied and installed. A traditional Finnish sauna for two to three people runs from about AED 22,000, and bespoke four to six person cabins in Nordic spruce or thermowood generally sit between AED 45,000 and AED 90,000 depending on timber, glazing and heater. The variables that move the price most are cabin volume, the amount of glass, and whether the electrical supply already reaches the room.

How much does a steam room cost in Dubai?

Converting an existing shower into a steam enclosure starts around AED 12,000. A fully tanked and tiled steam room for two to three people usually falls between AED 25,000 and AED 55,000, because the cost sits in the waterproofing, the fall to drain, the ceiling slope and the generator — not in the tiles. We quote each element separately so you can see exactly where the money goes.

How long does installation take?

A prefabricated sauna cabin is normally installed in one to three days. A custom-built sauna takes two to three weeks from approval, most of which is joinery lead time. A tiled steam room takes three to four weeks because the tanking must cure and be flood-tested before tiling starts. We give you a dated programme with the quote.

Do I need Dubai Municipality or developer approval?

For a freestanding cabin inside your own villa, usually not. You will need approval where the work touches the building fabric or services — new drainage, a structural opening, a three-phase supply upgrade, or anything in a shared or listed building. Most Dubai communities also require a developer NOC before contractors start. We prepare the drawings and submissions for you.

What electrical supply does a sauna need?

Heater size follows cabin volume. Roughly, a 4.5 kW heater suits up to 6 m³ and runs on a single-phase 25A circuit; 6 kW to 8 kW units for larger cabins need three-phase supply. Infrared cabins are the exception — most run from an ordinary 13A socket. We check the DEWA load and the distribution board before quoting, so nothing is discovered halfway through.

Sauna or steam room — which is better for a villa?

Saunas are dry heat at 80–100°C and are simpler to build: a timber cabin, a heater, a vent, and a power supply. Steam rooms sit at 43–46°C with 100% humidity, which means every surface must be tanked and every millimetre of ceiling must fall so condensation runs to the walls instead of dripping. If your space is dry and has power, a sauna is faster and cheaper. If it is an existing wet room with drainage, a steam room makes better use of it.

Can a sauna be installed in an apartment?

Yes, and infrared cabins are the usual answer because they need no plumbing and no supply upgrade. Traditional saunas are possible where the building allows the electrical load and the ventilation can be routed. Building management approval is almost always required first — we handle that correspondence.

What is the minimum space needed?

A comfortable two-person sauna needs about 1.5 × 1.5 m with a 2.1 m ceiling. Steam rooms work from roughly 1.2 × 1.2 m. Ceiling height matters more than floor area in a steam room: keep it under 2.4 m or you are heating volume nobody sits in, and the generator has to work harder for it.

Do you supply warranty and servicing?

Every installation carries a workmanship warranty, with manufacturer cover on heaters and generators. Dubai water is hard, so steam generators scale quickly — an annual maintenance contract covering descaling, element checks and timber care is the difference between a room that lasts fifteen years and one that fails in three.

Send us the room, we will send you the number

A photo and a rough measurement is enough to start. If the space will not take what you have in mind, we would rather tell you now than after a deposit.

Get in touch

Talk to someone who has built one

Not a call centre — the person who answers has been on site.

WhatsApp us