Finnish / Traditional Sauna
Nordic spruce and thermowood cabins with Harvia, Tylö or EOS heaters — 80–100°C dry heat, built to Dubai Municipality standards.
Read more
Most villa saunas are not built in a room designed for one. They go into a basement corner, a spare bathroom or the end of a dressing room, which means the real work is fitting a controlled environment into a space that was never intended to hold one.
Custom / Custom
We install private saunas in villas and townhouses throughout Dubai, from a compact cabin in a basement corner to a glazed wellness room with a plunge pool alongside. Every project starts with a survey, because in a home the constraints are always specific: the ceiling height, the distribution board, the route for the vent and the way the family actually moves through the house. Our Dubai sauna and steam room installation team handles the joinery, the electrical work and the community paperwork as one scope.
The best location in most Dubai villas. Cool ambient temperature, solid floor, usually a spare way in the board, and no disruption to the living areas. A glass front turns what is otherwise a windowless box into a room people want to be in.
Popular and straightforward, provided the ceiling is not too high and a dry corner exists. The sauna and the existing shower together give you the full hot-cold cycle without any plumbing alteration.
Covered terraces work well. Open ones need the shading and weather detailing described on our outdoor and barrel sauna page.
Where the supply cannot be upgraded, an infrared cabin on a standard socket is the sensible answer.
| Check | Why it matters |
|---|---|
| Ceiling height | Under 2.2 m is ideal; above that you heat unused volume |
| Distribution board | Spare ways and available load decide heater size |
| Wall construction | Masonry or partition changes fixing and heater clearance |
| Ventilation route | Extract has to reach outside air or a ventilated void |
| Floor level | A cabin on an uneven floor will never seal at the door |
| Access | Panel sizes versus your doorways, stairs and lift |
| Community rules | NOC requirements and permitted working hours |
| Scope | Indicative installed price | Programme |
|---|---|---|
| Prefabricated cabin, 2-3 person | AED 22,000 - 45,000 | 2-3 weeks |
| Bespoke cabin, 4-6 person | AED 45,000 - 90,000 | 3-5 weeks |
| Infrared cabin | AED 9,000 - 32,000 | 1-2 weeks |
| Three-phase circuit, where required | AED 4,000 - 12,000 | Within programme |
Palm Jumeirah, Emirates Hills, Dubai Hills Estate, Arabian Ranches, Jumeirah Golf Estates, Al Barari, The Springs and Meadows, Jumeirah Park, Damac Hills, Tilal Al Ghaf and Mohammed Bin Rashid City — plus villa projects across Abu Dhabi, Sharjah, Ajman and Ras Al Khaimah. See also sauna installation in Dubai.
In order of practicality: a basement or utility area with a spare electrical way, a large master bathroom, a terrace or garden, then a converted store room. What we look for is a wall that can take a ventilation route, reasonable proximity to the distribution board, and a floor that is level and solid. Ceiling height under 2.2 metres is ideal, because heating volume nobody sits in is wasted.
Almost always, yes. Emaar, Nakheel, Dubai Properties, Damac and most other communities require an NOC before any contractor works on the property, even for internal work. It is a straightforward submission and we prepare it, but it takes time, so it belongs at the start of the programme rather than the week you want to begin.
Not when it is built correctly. A domestic cabin is light, it is dry, and the vapour barrier keeps moisture inside the cabin rather than in your walls. Where we do check carefully is floor construction on upper levels, and whether the wall behind the heater is masonry or a lightweight partition, which affects fixing and clearances.
Yes, and it is a common arrangement. The cabin occupies a dry corner, the shower stays where it is, and you gain the sauna and cold shower combination without any plumbing work. The main constraints are ceiling height and finding a route for the extract.
A prefabricated cabin is two to three days on site. A bespoke cabin is three to five weeks in total but most of that is fabrication in the workshop, with only about a week of activity in your home. Noise and dust are concentrated into the first day or two.
Between AED 22,000 and 45,000 for a good prefabricated two to three person cabin, and AED 45,000 to 90,000 for bespoke joinery with glass. Adding a three-phase circuit where none exists is the most common extra, at AED 4,000 to 12,000 depending on the distance back to the board.
Nordic spruce and thermowood cabins with Harvia, Tylö or EOS heaters — 80–100°C dry heat, built to Dubai Municipality standards.
Read moreLow-temperature far-infrared cabins on a 13A socket — no plumbing, no three-phase supply, ideal for apartments and clinics.
Read moreConvert an existing shower into a sealed steam enclosure — glass, generator, seat and drainage in one visit.
Read moreGarden and rooftop cabins in thermo-treated pine, UV-sealed and weather-detailed for 50°C summers and coastal salt air.
Read moreChillers sized for UAE ambient loads, holding 4–15°C through August without tripping into permanent duty.
Read moreQuarterly descaling, element checks and timber care — annual contracts that keep a room out of downtime.
Read moreThirty minutes on site tells us more than an hour on the phone — and it is the only way to give you a price that does not move.