Finnish / Traditional Sauna
Nordic spruce and thermowood cabins with Harvia, Tylö or EOS heaters — 80–100°C dry heat, built to Dubai Municipality standards.
Read more
An infrared cabin heats the body rather than the air, which is why it works at 45 to 60 degrees instead of 90. That single difference removes the two things that make a traditional sauna hard to fit: the supply upgrade and the ventilation route.
45–60°C / Ambient
Infrared cabins are the practical answer for apartments, clinics and any room where the electrical supply is fixed. We supply and install them across Dubai for private homes, physiotherapy practices and gym recovery areas. If you are weighing this against a traditional cabin, our Dubai sauna and steam room installation team will tell you plainly which suits your space.
Most one to three person cabins draw 1.6 to 2.4 kW, within the capacity of an ordinary 13A socket on a dedicated circuit. No three-phase supply, no distribution board upgrade, no landlord negotiation about load. This is the single reason infrared dominates the apartment market.
There is no water, no steam and no drain, so the cabin is a piece of furniture rather than a building alteration. It can be dismantled and moved to a new property, which matters in a city where people relocate often.
At 45 to 60 degrees a session runs thirty to forty-five minutes rather than the ten to fifteen most people manage at 90 degrees. That suits recovery and rehabilitation use, and it suits anyone who finds a traditional sauna simply too hot to enjoy.
| Element | What we specify |
|---|---|
| Operating climate | 45-60°C, ambient humidity |
| Emitters | Low-EMF carbon panels, full-spectrum on request |
| Cabin | Canadian hemlock or cedar, tongue and groove |
| Power draw | 1.6-2.4 kW typical; 13A socket, dedicated circuit |
| Controls | Digital panel, session timer, optional app control |
| Typical footprint | 1.0 x 1.0 m (1 person) to 1.8 x 1.2 m (4 person) |
| Ceiling height | 1.9 m minimum |
| Heat-up time | 10-15 minutes |
| Extras | Chromotherapy lighting, Bluetooth audio, salt panel |
| Scope | Indicative installed price | Programme |
|---|---|---|
| 1-2 person carbon panel cabin | AED 9,000 - 18,000 | 1-2 weeks |
| 3-4 person cabin | AED 18,000 - 32,000 | 1-2 weeks |
| Full-spectrum cabin | AED 26,000 - 45,000 | 2-3 weeks |
| Built-in infrared room, bespoke | From AED 35,000 | 3-4 weeks |
If you want the intense dry heat, the steam burst from water on hot stones, and a room that feels like a proper sauna, nothing replaces a Finnish cabin. If you want the sweat and the recovery benefit without the supply upgrade, infrared does the job for a third of the cost and a fraction of the disruption. Many of our villa clients end up with both, plus a cold plunge between them.
We install infrared rooms in physiotherapy clinics, recovery studios and gym wellness areas, where the low temperature, the absence of humidity and the wipe-down surfaces make supervision and hygiene straightforward. For multi-room projects see commercial spa fit-out.
Infrared saunas across Dubai including Downtown, Business Bay, Dubai Marina, JVC and Jumeirah, and throughout Abu Dhabi, Sharjah, Ajman and Ras Al Khaimah.
Yes, and it is usually the only sauna that can. Most cabins draw between 1.6 and 2.4 kW and run from an ordinary 13A socket, so there is no supply upgrade, no three-phase requirement and no plumbing. Building management approval is still worth obtaining because of the floor loading and the delivery route, but the technical objections that block a traditional sauna do not apply.
Far infrared is the long wavelength that penetrates soft tissue and produces the sweat response most people want. Near infrared is shorter and is marketed for skin and wound applications. Full-spectrum cabins offer both. For general recovery and relaxation, a good far infrared carbon panel cabin does everything most owners need, and it costs considerably less.
Carbon panels cover a large surface area and produce gentle, even heat at a lower surface temperature, which most users prefer. Ceramic rods run hotter and heat faster but the heat is more directional, so you feel hot on one side. We fit carbon as standard and ceramic only on request.
Ten to fifteen minutes, though strictly speaking you do not need to wait. The panels emit from the moment they are switched on, so a session can start immediately and the cabin simply becomes more comfortable as the air warms.
Cheap panels can. Reputable manufacturers publish low-EMF and low-ELF test figures for their carbon panels, and we only supply cabins that come with those figures. If a supplier cannot produce the test data for the specific panel model, treat the claim as marketing.
Between AED 9,000 and 18,000 supplied and installed for a one to two person cabin, and AED 18,000 to 32,000 for a three to four person or full-spectrum unit. Installation is genuinely simple, so the price is mostly the cabin itself rather than the labour.
Nordic spruce and thermowood cabins with Harvia, Tylö or EOS heaters — 80–100°C dry heat, built to Dubai Municipality standards.
Read moreBespoke cabins fitted into villa bathrooms, basements and terraces across Palm Jumeirah, Emirates Hills and Dubai Hills.
Read moreHotels, gyms and clubs — multi-cabin thermal suites delivered with drawings, approvals and handover documentation.
Read moreChillers sized for UAE ambient loads, holding 4–15°C through August without tripping into permanent duty.
Read moreConvert an existing shower into a sealed steam enclosure — glass, generator, seat and drainage in one visit.
Read moreQuarterly descaling, element checks and timber care — annual contracts that keep a room out of downtime.
Read moreThirty minutes on site tells us more than an hour on the phone — and it is the only way to give you a price that does not move.