Turkish Hammam
Heated marble göbektaşı slabs, domed ceilings and radiant benches built by tilers who have done it before.
Read more
This page is for building a Moroccan bath room, not for booking a treatment in one. If you run a salon or spa, or you want a treatment room in a villa, the room has to survive several sessions a day, every day, which is a very different specification from a domestic steam room.
40–45°C / 90–100% RH
We build and fit out Moroccan bath rooms across Dubai for salons, day spas, hotels and private villas. If you are searching to book a treatment, this is not that page. If you are creating the room, everything below is what we would talk through at a survey. Part of our wider sauna and steam room installation work in Dubai.
Tadelakt where authenticity matters and there is budget for the craft and its upkeep. Microcement over a tanking membrane where the client wants the seamless look with less maintenance. Large-format porcelain where the room is high traffic and cleaning speed between clients matters more than texture. All three work; they are simply different trade-offs.
A treatment bed in solid surface or stone, warmed from beneath, falls to drain, and set at a working height that will not destroy a therapist's back over a ten-hour day. This is the detail salon owners most often get wrong, because it is specified from a photograph rather than from how the treatment is actually performed.
A Moroccan bath uses a great deal of water and it all has to leave quickly. Falls across the whole floor to a generously sized drain, a hand shower on a long hose, and tempered water at the bed. Anything less and the therapist is working in standing water by the second client.
The generator is sized for repeated back-to-back sessions rather than one domestic use per evening, and the extract is designed so the room clears between clients. A room that takes forty minutes to become workable again is a room that costs you a booking slot.
| Element | What we specify |
|---|---|
| Operating climate | 40-45°C, 90-100% relative humidity |
| Wall finish | Tadelakt, microcement or large-format porcelain |
| Treatment bed | Heated solid surface or stone, drained, ergonomic height |
| Waterproofing | Full tanking behind all finishes, flood-tested |
| Drainage | Falls across full floor, oversized drain, hand shower |
| Steam | Commercial-duty generator, auto drain and descale cycle |
| Ventilation | Extract sized for rapid turnaround between clients |
| Lighting | IP65, warm, dimmable; fibre optic optional |
| Storage | Sealed niches for soap, kessa gloves and towels |
| Scope | Indicative installed price | Programme |
|---|---|---|
| Private villa treatment room | AED 35,000 - 70,000 | 4-6 weeks |
| Salon room, commercial duty | AED 55,000 - 120,000 | 5-8 weeks |
| Multi-room spa suite | On application | 8-14 weeks |
| Tadelakt uplift over microcement | Adds 15-30% | Adds 1-2 weeks |
For the larger architectural version with a central heated slab, see Turkish hammam construction. For a straightforward wet room without the treatment function, see steam room installation. For a full salon or spa build, see commercial spa fit-out.
Moroccan bath rooms across Dubai including Jumeirah, Al Barsha, Business Bay, Deira and Al Quoz, plus Abu Dhabi, Sharjah, Ajman and Ras Al Khaimah.
A Moroccan bath centres on a treatment: steam to open the pores, black soap, then an exfoliating scrub with a kessa glove, usually delivered by a therapist on a heated bed. A Turkish hammam is architecturally larger, built around a central heated marble slab called a gobektasi, with the bather lying on the stone itself. Structurally the Moroccan bath is a smaller and simpler build.
Tadelakt is a polished lime plaster, traditionally sealed with olive oil soap, that produces a seamless waterproof surface with no grout lines. It works well here and it looks unmistakably authentic, but it is a skilled hand-applied finish and it needs re-sealing periodically. Where a client wants the look with lower maintenance, microcement over a proper tanking membrane is the practical alternative.
Between AED 35,000 and 120,000 depending on size, finish and whether the room is domestic or commercial. A salon treatment room with tadelakt, a heated bed, steam supply and full drainage typically lands in the middle of that range. Commercial rooms cost more because everything is specified for continuous duty.
Four to eight weeks. Tanking has to cure and be flood-tested, and tadelakt is applied and polished in stages that cannot be rushed. For a salon opening to a fixed date, this is the trade that needs booking earliest.
For a commercial premises, yes. Fit-out approval through the relevant authority and the landlord, plus health and safety requirements covering drainage, ventilation and electrical safety in a wet treatment area. We prepare drawings and submissions as part of the project.
Considerably more than a domestic room. Daily wipe-down, weekly deep clean, quarterly generator descaling given the water hardness here, and periodic re-sealing of the tadelakt. A maintenance contract is not optional for a room generating revenue every day.
Heated marble göbektaşı slabs, domed ceilings and radiant benches built by tilers who have done it before.
Read moreFully tanked, tiled or acrylic steam rooms at 100% humidity — vapour barrier, fall-to-drain and generator sizing done properly.
Read moreHotels, gyms and clubs — multi-cabin thermal suites delivered with drawings, approvals and handover documentation.
Read moreSupply, sizing, descaling and same-week repair for Tylö, Harvia, Steamtec and Mr.Steam generators.
Read moreConvert an existing shower into a sealed steam enclosure — glass, generator, seat and drainage in one visit.
Read moreQuarterly descaling, element checks and timber care — annual contracts that keep a room out of downtime.
Read moreThirty minutes on site tells us more than an hour on the phone — and it is the only way to give you a price that does not move.