Site surveys across Dubai & Northern Emirates
+971 50 646 3043 has@fastfixdxb.com Monday – Saturday · 8:00 AM – 6:00 PM
Sauna heater stones removed and stacked on the bench beside a brush and replacement stones

Sauna maintenance checklist for UAE owners

27 December 2026  ·  5 min read

Saunas need remarkably little care, which is precisely why they get none at all. Four small jobs cover almost everything, and one of them costs under a thousand dirhams.

A sauna is the lowest-maintenance wellness room you can own — which is exactly why so many go a decade with nothing done to them at all. Here is the whole regime, which is shorter than most people expect.

After every use

  • Leave the door ajar so the cabin dries out. This single habit does more than everything else combined.
  • Wipe the benches with a damp cloth.
  • Let the extract run if you have one on a timer.

Monthly

  • Look at the stones. If they have visibly settled or you can see fragments, they are due for replacement.
  • Check the door closes cleanly and seals along its full edge.
  • Check the inlet vent is clear — they collect dust and get blocked by stored items.

Every 12 to 18 months

  • Replace the stones. AED 450 to 900 and the single most valuable job on this list. Old stones pack down and restrict the airflow the element needs to cool itself.
  • Light sand on bench tops if they have marked, then paraffin oil if you want it.
  • Check fixings on benches and backrests.
  • Inspect the door seal and replace if perished.

Annually, professionally

  • Element condition and thermostat accuracy
  • Over-temperature cut-out function test
  • Electrical isolation, RCD test, visible cable condition
  • Vapour barrier and timber inspection for moisture signs
  • Ventilation inlet and extract function
  • Written condition report
If you have a steam room too, the schedule is entirely different and far less forgiving. Generators need descaling every three to six months in UAE water or the element fails — see how often to descale a steam generator.

Warning signs worth acting on

SymptomUsual cause
Slower to reach temperaturePacked stones, perished door seal, or blocked inlet
One side of the cabin coolerElement failing, or airflow restricted through the heater
Burning smell on start-upDust on the element, or something stored too close
Cutting out earlyThermostat or over-temperature sensor
Dark staining on timberMoisture behind cladding — investigate promptly
Sticky residue on benchesResinous bench timber, wrong species specified

What not to do

Do not varnish, seal or paint anything inside. Do not use strong detergents or disinfectants on unsealed timber. Do not store anything inside the cabin between uses, particularly near the heater. Do not ignore a slow heat-up for a year and then conclude the heater needs replacing — it often does not.

If you have inherited a sauna with a property and have no idea when it was last touched, a condition survey is worth far more than it costs. Details at sauna and steam room maintenance.

Common questions

How often should sauna stones be replaced?

Every twelve to eighteen months in regular use. Stones fracture and settle over time, packing tighter and restricting the airflow the heating element depends on for cooling. Choked airflow is the leading cause of premature element failure, which makes stone replacement the best value maintenance job there is.

Should I clean sauna benches with detergent?

No. Wipe with water and, if needed, a very mild solution, then let the cabin dry. Detergents and disinfectants soak into unsealed timber and release fumes at temperature. For stains, a light sand is the correct answer rather than a stronger chemical.

Why does my sauna take longer to heat than it used to?

In order of likelihood: the stones have packed down and need replacing, the door seal has perished so heat is escaping, the inlet vent is blocked, or the element is degrading. The first three are inexpensive. Diagnosing before replacing the heater is worth doing.

Do I need to treat the timber inside a sauna?

No sealing, no varnishing, no painting. Optionally, paraffin oil on bench tops once a year. That is the entire regime. Anything that forms a film traps moisture in the timber and blisters at temperature.

What should I do after each use?

Leave the door slightly ajar so the cabin dries, and wipe the benches. That is it, and it does more for the cabin's lifespan than anything else on this list.

Written by FastFix Technical Services LLC, a licensed technical services company installing saunas, steam rooms and cold plunge pools across the UAE since 2014. Everything here comes from rooms we have built or been called in to repair. Book a free site survey or call +971 50 646 3043.

Still deciding?

Send a photo and a rough measurement. We will tell you what your space can take and roughly what it costs, before anyone visits.

WhatsApp us